For your safety:

Secure the workpiece
Do not work materials containing asbestos
Always wait until the tool has come to a complete stop before placing it down
Do not use a power tool with a damaged power cord, do not touch the damaged power cord and pull the power plug when the cord is damaged while working
Connect power tools that are used in the open via ground fault circuit interrupter
Keep hands away from the cutting area
Guide the tool against the workpiece only when it is switched on
Pay attention that the footplate rests securely on the material while sawing
After the cut, switch off the power tool and wait until the saw blade has come to a stop before pulling it out of the cut
Use only undamaged blades that are in proper condition
After switching off, do not "brake" the saw blade by applying sideward pressure against it
Use appropriate detectors to determine if utility lines are hidden in the work area or call the local utility company for assistance

Assembly:

Installing or removing saw blade
Hex wrench storage
Anti-splintering device (optional accessory)
Bevel cutting
Front flush cuts
Cutouts
Finishing edges
Metal cutting
Dust extraction
Rip fence (optional accessory)
Specification:
- Voltage: 220-240 V
- Rated input power: 500 W
- Frequency: 50Hz
- no. 500-300/min
- 50mm
WARNING: FOR YOUR SAFETY, READ AND UNDERSTAND BEFORE USING AND SAVE THESE INSTRUCTION FOR FUTURE REFERENCE