Description

Features:

• AERV-XX timer relays are used in all fields (industry, house, plant...) need control related to the time

Usage of device and working principle:

• Please adjust the delaying time by the button
• Energize the device
• Device will count the stand by time 
• On (power) led gets on when the counting occurs 
• Out (relay) led gets on and off
• During this step contact output is (NC)1
• After the time is up out (relay) let gets on constantly and contact out put gets into (NO)3
• Until it is de-energized device remains the same 

Maintenance:

• Switch off the device and release from connections
• Clean the trunk of device with a swab 
• Don't use any conductor or chemical might damage the device 
• Make sure device works after cleaning 

Warnings:

• Please use the device according to the manual 
• Don't use the device in wet
• Include a switch and circuit breaker nearby the device, operator can reach easily
• Mark the switch and circuit breaker are releasing connection for device

Specifications:

• Operating voltage: 150V - 260 V
• Operating frequency: 50/60 Hz
• Operating power: <4VA
• Operating temperature: -20 °C ..........+55°C
• Time: 0.1-3 min
• Display: On led and out (RLY) led
• Connection type: terminal connection
• Weight: Max. 90 g
• Contact: 5A/250V AC (Resistive load)
• Mounting: Vertical assembled in the panel or assembled on the din rail
• Operating altitude: <2000meter 
• Cable diameter: 2.5mm2